To tune the digital as well as analogue channels, you can use the Auto Store function. To search and store available digital channels, follow the steps below.

1. Press the MENU button [] on your remote control. Use the Up / Down arrow buttons [ ] for navigation.
2. Scroll down to Auto Store and press the ENTER button [].
3. Select Antenna type and press the ENTER button [].
4. Select the antenna type that you are using (Air or Cable) and press the ENTER button [].
5. Select Channel Source and press the ENTER button [].
6. Select Digital and press the ENTER button [].
7. Select Search and press the ENTER button []. This will scan for all available analogue channels.

Another way to tune the channels is using the Manual Store that scans for a channel manually and stores it in TV's memory.

NOTE: The digital channel is only available in DTV mode.

1. Press the MENU button [] on your remote control. Use the Up / Down arrow buttons [ ] for navigation.
2. Scroll down to Manual Store and press the ENTER button [].
3. Select Digital channel.
4. Select Channel and set the Channel number using the Up / Down arrow buttons [] or number buttons (0 – 9).
5. Select Frequency and set the frequency using the number buttons.
6. Select Bandwidth and set the bandwidth using the Up / Down arrow buttons [ ] or number buttons (0 – 9).

NOTE: When the manual store process is completed, channels are updated in the channel list.

IMPORTANT: If you experience a problem when tuning digital channels, you should contact the broadcaster because the solution could be different for each broadcaster.